ChiuVention SmartPull Tensile Strength Tester (Dual Column Type)
The SmartPull Tensile Strength Tester is used to test the tension, compression, bending, bursting, shearing, and peeling of materials (fabric, leather, plastic, paper, etc.). The equipment can be controlled by computer, and collect accurate data, analyze data, and output test results, and reports.
Request a Quote Download BrochureDescription
The Specification of SmartPull Tensile Strength Tester
Testing capacity: 1000 kg
Test level: class1
Max Travel: 900mm (without fixture)
Travel accuracy: ±0.5%
Travel speed: 1mm/min ~500mm/min
Speed accuracy: speed <10mm/min, within ±1% of the set value
Speed ≥10mm/min, within ±0.2% of the set value
Test force range: 0.2% ~ 100%FS
Test force value accuracy: ±1%
Range of constant rate control: 0.5%~100FS
Test Standards
Fixture of Tensile Strength Testing Machine
Standard fixture and corresponding standards：
Manual stretching fixture should be equipped with: 25x25mm, 25x50mm, 25x75mm clips
ISO 9073-3 ISO 13934-1 ISO 13934-2
ISO 13935-1 ISO 13935-2 ASTM D5034
ASTM D5035
Optional fixture and standards
The Pneumatic tension fixture & foot switch are equipped with：25x25mm，25x50mm，25x75mm clips
25x75mm clamp(Optional 100mm jaws)
U-shaped Fixture ASTM D4964
Yarn Fixture ISO2062
Bursting Fixture ASTM D6797 FZ/T 01030 GB/T 19976
Leather Tearing Fixture ISO 3377-2
Tensile Test Standards of the optional tension fixture
ISO 9073-4 ( require 25x100mm clips) ISO 3377-1
ISO 13936-1 ISO 13936-2
ISO 13937-2 ISO 13937-3 ISO 13937-4
ISO 20932-1 (need to match the linear fixture, the type of fixtures may need to be changed )
ISO 4674-1 GB/T 3917.3 GB/T 3917.5 GB/T 3923.1
75mm tension fixture jaw mounting block (optional 100mm jaw,quantity 0)
Related Machines
