Testing Instruments

TEXTEST Air Permeability Tester Model FX 3300-IV

Measures the air permeability of all kinds of flat materials as well as foam cubes. Our most successful instrument.

TEXTEST Hydrostatic Head Tester FX 3000-IV

Measures the resistance of plastic foils, coated and uncoated fabrics and non-wovens to water penetration by means of the dynamic, static and program test method. Your choice: manual, semi-automatic or – worldwide unique: – fully automatic operation without any operator attendance.

TEXTEST FX 3370 SpotAir

The FX 3370 Air Permeability Tester SpotAir determines the Air Permeability, the Pressure Drop and the Acoustic Impedance at the moving web. It’s the smallest, lightest and most versatile Air Permeability Tester currently available in the market.

ChiuVention Smartindale Martindale Abrasion & Pilling Tester

ChiuVention AirBurst Bursting Strength Tester

The AirBurst Bursting Strength Tester is a pneumatic device designed for precise and reliable testing of the bursting strength of textiles, films, paper, and foam. It features a high-precision laser sensor for accurate measurements and connects to the SmarTexLab App for smart testing and data management.

Mark-10 Series TT01 Cap Torque Testers

Series TT01 Cap Torque Testers are designed to measure the application and removal torque of bottle caps up to 100 lbFin [11.5 Nm]. Adjustable posts effectively grip a broad range of container shapes and sizes, while optional flat and adjustable jaws are available for unique profiles. A rugged aluminum design, and simple, intuitive operation allow for use in laboratory and production environments.

Yasuda No.542-AB AUTOMATIC FILM APPLICATOR

• This machine enables the operator to make a coating surface of ink, colorant, and paint automatically.
• The machine will coat at a constant speed and pressure, solving the problems of unevenness and individual variability when coating.
• The plate can be made with vacuum holes so that the operator can coat paper and even polyester film under a vacuum state.
• The machine can be used together with a BARCOATER and APPLICATOR.

Yasuda No.429 OLSEN TYPE STIFFNESS TESTER (FOR LIGHT LOAD)

• This tester is used to evaluate the bending reaction strength of stiff textiles according to the bending method.
• Fixing one end of the test specimen to the Chuck and bending the test specimen to a prescript shift degree, the operator is to measure the bending moment that is added to the other end.

Yasuda No.270-L ROSS FLEXING TESTER (WITH REFRIGERATING MACHINE)

• This model is equipped with a low temp.
• chamber for conducting flexing tests at low temperatures.
• The durability is evaluated by the number of bends it takes for the crack to grow every 100 % up to 500 %.

Yasuda No.268 UNIVERSAL IMPACT TESTER

• This pendulum-type Charpy impact tester can automatically conduct the test cycle and is capable of testing at extremely low temperatures (as low as -70°C).
• Test conditions are inputted via touch screen and a maximum of 210 specimens can be tested continuously.
• Due to the high capability of the refrigerating system, it is both times and cost-efficient when compared to any other model.

Yasuda No.258 IMPACT TESTER (ANALOG)

• This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil.
• The tester can be attached with an optical rotary encoder, so that the impact data can be saved in a computer.

Yasuda No.185-AUTO PARALLEL PLATE PLASTOMETER (AUTOMATIC)

• This tester is to conduct heat deformation tests to rubber and plastic electric insulated wires.
• Placing the test specimen between the parallel plates and adding prescript load and heat for 30 minutes, the operator is to measure the reduction rate in thickness of the test specimen before and after the test has been conducted.
• The operator is to set the pre-heating time and the testing time on the touch panel, and then the tester will load, unload, and show and print the test data automatically.

Yasuda No.183 FALLING BALL IMPACT TESTER

• This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
• The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

Yasuda No.181 FILM IMPACT TESTER

• This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
• A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
• The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.

Yasuda No.162 SLIP TESTER

• This tester is used to measure the friction coefficient of plastic film and paper according to the inclination method.
• By inclining the inclination board at a constant speed, the static friction coefficient can be measured at the tangent at which the test specimen starts to slip.