Yasuda No.120-FWP Melt-Flow Index Tester (Manual)

This tester is for measuring the melt flow index of thermo-plastic. The test can be conducted easily, from setting the test condition up to data analysis, using a 5.7” full color touch panel.

Request a Quote

Description

Hangings: 1 Hanging
Die: φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston: Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder: Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range: Max. 400 °C
Initial Weight: 0.325 kgf
Additional Weight: 1.20 〜 21.60（※ Please refer below）
Test Method: Method A: Manual (Option: Automatic Cutter); Method B: Automatic
Data Processing: Method A: Automatic (Measuring the weight of the cut off specimen is done by hand); Method B: Automatic
Method B Measuring: Rotary Encoder
Standard Specification: SD Card Slot, LAN Port
Option: Mini Printer, Method A Air Pressure Type Automatic Cutter, Manual Type Die Plug, Safety Cover with Interlock Attached, Half Die, Air Pressure Type Automatic Loader (No.120-FWP-W); Additional Weight ( 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf.)
Accessories: Cleaning Rod (Die & Cylinder), Injection Rod, Funnel, Die Gauge, Method A Cutting Knife, Spirit Level, Gauze
Power Source: AC 100 V, 1-Phase, 15 A, 50/60 Hz or AC 200 V, 1-Phase, 10 A, 50/60 Hz
Air Source: 0.5 MPa or More(For Method A Pneumatic Type Weight Loading Device Specification)
Dimensions/ Weight(Approx.): No.120FWP: W660× D450 × H1,020 mm/75 kg; No.120FWP-WP-W: W710 × D450 × H1,060 mm/ 120 kg