ATI Corporation HTT-01 Hot Tack Tester

Hot tack is the property of a heat sealed layer to resist forces that would pull the seal apart while it is still hot. This property is of vial importance for veritcal form fill and seal process(VFFS). HTT-01 Hot Tack Tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature.

Request a Quote

Description

HTT-02 Hot Tack Tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature.

● Zeroing at any position to facilitate differential measurement
● With ON/OFF switch key, or automatic power off
● Measurement unit can be converted between mm and in

HTT-02 Hot Tack Tester is a PLC controlled unit(industrial level stable) and HMI touch screen operated. Every part of the dart assembly and releasing mechanism are made strictly to standard.

1. Both Method A and Method B described in ASTM F1921
2. P.I.D. temperature control
3. 7 inch HMI touching screen operation
4. PLC control inside
5. Aluminum encapsulated sealing jaws
6. Auto zeroing, overload and over travel protection
7. Test speed 200cm/min, 1200cm/min or others

Item	Parameters
Sealing Temperature	Ambient~250℃
Temperature Accuracy	±0.2℃
Heat Seal Dwell Time	0.1~9999S
Hot Tack Dwell Time	0.1~9999S
Sealing Pressure	0.1MPa~0.7MPa
Sealing Jaws	50mm*10mm Teflon Coated
Sealing Jaws Heating	Doube Heating
Load Cell	200N(Optional: 30N,50N,100N,500N
Accuracy	0.5 F.S.
Resolution	0.01N

Test Standards

ASTM F1921 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs